CA20FL digital alcohol detector with SMART fuel sensor / Premium Alcohol Detectors /

CA20FL digital alcohol detector SMART fuel cell sensor and LCD display

The new HAN-CA20FL Alcohol Test with SMART electrochemical fuel cell sensor and digital display is recommended for quickly determining the presence of alcohol in the breath. Successfully used to determine blood alcohol levels in employees and prevent work-related accidents caused by alcohol consumption. A Korean breathalyzer of the highest quality, with SMART Fuel Cell Sensor technology and multiple functions.

An easy-to-use breathalyzer and almost no maintenance costs

The HAN-CA20FL breathalyzer is more reliable and more accurate compared to other breathalyzer devices on the market.

Here are the reasons:

it has a state-of-the-art electrochemical sensor and increased accuracy
increased reliability of the detection sensor, over 5,000 measurements
with illuminated digital screen with large, visible and dark characters
displays the result in three digits, type 0.00 ‰
do quick and hygienic blood alcohol tests
provides accurate results with an accuracy of 0.05%
with advanced functions to control and detect attempts to defraud blood alcohol tests

The tested employee cannot "fool" the alcohol test !!!

with health control function of the detection sensor
with the function of controlling and limiting the use of the alcohol test outside the recommended temperatures
with counter of blood alcohol measurments
wide detection range, between 0.00 - 4.00 ‰ and overtaking warning
low power consumption, with a quality alkaline battery (Duracell®) you can make ~ 500 measurements
ergonomic, simple and easy to use
economical, with cheap consumables.

How to take a blood alcohol test with the HAN-CA20FL alcohol detector

attach a new, sealed mouthpiece
turn on the breathalyzer
while the countdown is running, instruct the subject to breathe in the lung, and,
when the READY message is displayed, blow into the device for 4 seconds, until a beep-beeep sound is heard
the blood alcohol level will be displayed immediately
interpret the blood alcohol test result
remove the plastic mouthpiece
* To do a new test, press the On / Off button and repeat the steps above (1-7)
the alcohol test will automatically shut down after 30 seconds of inactivity.

How we interpret the blood alcohol test result:

0.00 ‰ - NEGATIVE TEST - the employee has NOT consumed alcoholic beverages or the measured value is below the technical limit of sensor detection;

between 0.00 - 0.50 ‰ - POSITIVE TEST - the employee has consumed alcohol and is under the influence of alcoholic beverages;

between 0.50 - 4.00 ‰ - POSITIVE TEST - the employee has consumed alcohol and is intoxicated!

Very important !!!

The alcohol test, although taking the air sample from the breath, will display the concentration of pure alcohol in the blood, based on the universally agreed formula of Metrology, k = 2100

that is, 1 ‰ pure alcohol in the blood (B.A.C.1) = 0.476 mg/L pure alcohol in the expired air (Br.A.C.2)

(1) - B.A.C. - Blood Alcohol Content

(2) - Br.A.C. - Breath Alcohol Content

Note

Companies that have already implemented a Zero Tolerance Policy for Alcohol Consumption at Work, provide in the Internal Regulations, the fact that, in case of finding an employee who violated this rules, disciplinary action may be applied but also pecuniary, going until the termination of the employment contract.

What does the HAN-CA20FL blood alcohol kit contain?

1 alcohol test HAN-CA20FL
3 hygienic mouthpieces
1 9V alkaline battery
a sturdy and compartmentalized box
1 user manual in Romanian & English
1 up-to-date calibration certificate valid for 1 year or 1000 measurements
1 2-year warranty certificate

List of accessories:

hygienic, single-use mouthpieces

9 V battery and charger pack

periodical calibration services

The Sensor
Sensor type	SMART fuel cell sensor 26 mm (1”) last generation and high accuracy
Reliability	Over 5.000 breath alcohol test, under normal conditions
Selectivity	Good
Accuracy	Under 0,050% BAC the normal deviation is ±0,005%
Sensor Calibration / Changing possibility	Yes
Calibration (Recommended)	Every 500 tests or once/year, which expires soon
Display
Display type	LCD
Display dimensions	31 x 21 mm
Color	Dual-color. Black characters on blue or red background
Operating conditions
Operating temperature	Between +0°C - +40°C or 32°F - 104°F. This device uis designed to be used within a temperature range of +5°C - 40°C or 41°F - 104°F
Storage temperature	Between +0°C - +40°C or 32°F - 104°F
Maximum relative humidity	80% Rh no condensation
About testing
Sampling system	Automatically actuated electronic absorption pump system.
Sampling method	STANDARD - with single use mouthpiece
Ready for testing in ... (seconds)	15 - 35 seconds
About result
Time required for output	3 - 22 seconds
Decimal numbers	Two decimal places (0,00) with an 0,01 increment step
Functions
Air flow rate checking	Yes
Air flow pressure checking	Yes
Ambiental temperature checking	Yes. When the ambient temperature is out of working temperature range the unit shows ”OUT” and turn off automatically. Keep and use the unit within the recommended temperature range.
Breath tests counter	Yes
Internal memory	No
Other features
Measurment unit	‰ or blood alcohol content
Measurment range	0,00 - 4,00 ‰ with 0,01 increment step. If the result is above the HOT signal is displayed along with alarm sound
Power supply	One 9V alcaline or rechargeable battery
Dimensions	125 x 56 x 24 mm
Weight	84 grams. 130 grams with battery included. 240 grams the whole kit
Certifications	CE
Warranty	2 years